Go to content

MVPD

MVP 3-2 Double
Proportional Valve Module
commercial version


intended to control 2 single independent
Proportional Hydraulic Valves without electrical position feedback
used for the main or crowning pressure adjustment


- Analog input: 0÷10 V DC.
- Output current: 0÷2 A.
- Calibrating:
- Automatic Input-to-Output Calibration from 0 to 100 % of the current carrying capacity of the valve
- Manual adjustment of the maximum current from 0.1 A to 2.0 A at 0.1 A steps.
- Control method of the valve: digital impulse control, "Ground" of the valve connected to pin 1. of MVP connector.
- Protection:
- Short circuit protection;
- Limitation of current up to 2 A;
- Monitoring of the output electronics temperature.
- Feedback: monitoring of the output current for automatic correction to achieve 1:1 linearity with a given input voltage.
Note: Some valves do not work linearly with impulse control but this splendid module copes just perfectly even with such objects!
- Power supply: 9÷35 V DC.
- Installation: DIN rail 35 mm.
- Type of housing: open.
- Cooling - none.
- Display:
upper 2x 7- segments displays the input voltage (0÷9.9 V DC)
lower 4x 7- segments displays the output current (0÷2000 mA, accuracy ± 1 mA).
- Differential input: NO.
- Dimmensions: 82 length x 45 width x 40 height (mm)

Main | Controllers | Application | Service | Components | About us | Contact us | After work | Site Map


Back to content | Back to main menu
UA-37453840-1